 | S-54
Automatic Collaring Unit for producing single collars for brazed joining of straight and bent tubes.
- Suitable for copper, aluminium, steel, stainless steel, brass and other malleable materials.
- Collar sizes 6 - 54 mm.
- Run tube sizes 8 - 108 mm
|
|
 Information
 |
|
 | S-54 - MFT
The Basic S-54 Collaring Unit can be equipped with Manual Feed Table (MFT) for production of headers and manifolds. MFT assures the exact positioning of collars. Tube positioning is being made manually by operator.
- Collar sizes 6 - 54 mm
- Run tube sizes 8 - 108 mm
|
|
Information
|
|
 | S-54 - AFT
S-54 Collaring machine with Automatic Feed Table (AFT) provides a collaring solution for making collars (manifolds, headers) within range 6 - 54 mm automatically
- Collar sizes 6 - 54 mm
- Run tube sizes 8 - 108 mm
|
|
Information
|
|
 | S-54 - TCS
The tube collaring system for automatic production of collars in manifolds:
- Uses S-54 collaring unit
- Includes PC-controls providing 2-axis positioning
- Collar sizes 6 - 54 mm
- Run tube sizes 8 - 108 mm
|
|
Information
|
|
 | T-110
Transportable Collaring Unit for both factory and on-site use to make Butt Welded pipe joints:
- For stainless steel, mild steel, copper/nickel, brass and aluminium alloys
- Collar sizes: 21.3 - 114.3 mm
- Run pipes: 33.7 - 323.9 mm
- Collaring time: 6.5 - 9 minutes
|
|
Information
|
|
 |
|
 | T-110 Cu
Transportable collaring unit for both factory and on site use. The model T-110 Cu has been designed for collaring of copper and gives a faster work cycle than steel tubing..
- Brazed joint
- Collar sizes 18 - 108 mm
- Run pipes 22 - 267 mm
- Collaring times: less than 2 minutes
|
|
Information
|
|
 | TEC-150
Collaring Station for Butt welded joints:
- For stainless steel, steel, copper, aluminium and copper nickel
- Collar sizes: 21.3 - 168.3 mm
- Run pipe diameters: 33.7 - 560 mm
- Collaring times: 2.5 - 7 minutes
|
|
Information
|
|
| TEC-150 Cu
Collaring Station for brazed joints. The model TEC-150 Cu has been designed for collaring of copper and gives a faster work cycle than steel tubing.
- Collar sizes 18 - 168.3 mm
- Run pipes 22 - 560 mm
|
| Information
|
|
 |
|
| TEC-150-8
Tube Collaring system that is capable to pull and trim 21.3 -219 mm collars. The pilot hole for the largest size is made manually, e.g. with plasma cutter. Pilot holes for collars smaller than 170 mm are made using the same process as the TEC-150.
|
|
Information
|
|
| TEC-150-8 & Positioning Table
Collaring machine with manual positioning system for run-tube
Longitudinal and angle position can be seen from digital read-out. See also TEC-150 and TEC-150-8.
|
|
Information
|
|
 |  New
TEC-150 HD
Heavy Duty Collaring Station for collars up to 168.3 mm with maximum wall thickness up to 12.7 mm in 168.3 mm collar size.
- Collar sizes: 21.3 - 168.3 mm
- Run pipe diameters: 33.7 - 560 mm
|
|
Information
|
|
| New
TEC-150-8 HD
Heavy Duty Collaring Station for collars up to 219.1 mm
- Run tube diameters 33.7 - 560 mm
|
| Information
|
|
 | SEC-100
Automatic Tube Collaring machine for single collars
- Branch sizes 21.3 - 114.3 mm
- Run pipe size 33.7 - 219.1 mm
- For copper, aluminium, steel and stainless steel tubes
|
|
Information
|
|
 | SEC-100-TBC
Automatic Tube Branching Center for multiple collars:
- The collaring program is selected from the PC controls
- The automatic cycle is started
- Makes all the collars according to the selected program.
- 2-axis positioning
|
|
Information
|
|
 | T-850
Collaring unit for branching of pipes with a big diameter - For stainless steel, mild steel and aluminium alloys - Collar sizes 168 - 880 mm - Run pipe sizes 265 - 1430 mm
|
| Information
|
|
