TCC-28 Automatic tube cutting machine for chipless tube cutting from coil.
- Automatic cut length setting
- Tube diameters 4.76 - 22 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
Новинки TCC-28 RL Automatic tube cutting machine for chipless tube cutting from straight lenghts
- Coil equipment for tubes coming from coil can be inserted
- Automatic cut length setting
- For tube diameters 4.76 - 28 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
Новинки TCC-28 RL and Coil Automatic tube cutting machine for chipless cutting from straight lengths and coil - Tube diameters 4.76- 22 mm from coil and straight tubes 4.76 - 28 mm - For all malleable materials such as aluminium, copper, steel and stainless steel
TCC-50 Automatic tube cutting machine for chipless tube cutting from coil
- Manual cut length setting
- For tube diameters 1.5 - 22 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
TCC-50 RL Automatic tube cutting machine for chipless tube cutting from straight lengths
- Coil equipment for tubes coming from coil can be inserted
- Manual cut length setting
- For tube diameters 6 - 45 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
TCC-50-RL Катушка Automatic chipless tube cutting machine for straight tubes and tubes comes from coil - For straight tube diameter 6- 45 mm and coil tubes 1.5 - 22 mm - For all malleable materials such as aluminium, copper, steel and stainless steel
TCC-25 LM Automatic Tube cutting machine with Linear Feed - Increased feeding speed allowed by Linear feeding - Automatic setting of four different cut lengths - Tube diameters Ø 4.76 - 22 mm - Cut lengths: 85mm-6000 mm
TCC-45 EF3 Automatic chipless rotary cutting, grooving and endforming machine. - All three operations simultaneously. - Max three endforming strokes
- Tube diameters 6 - 22 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
Новинки TCC-45 EF8 Automatic chipless rotary cutting, grooving and endforming machine. - All three operations simultaneously. - Max six endforming strokes
- Tube diameters 6 - 22 mm
- For all malleable materials such as aluminium, copper, steel and stainless steel
TCJ-50 Bench mounted chipless cut-off machine for short production runs of straight tubes
- For tube diameters 6 - 60 mm
- For all malleable materials such as aluminium, copper, mild steel, stainless steel, hard plastics
TCC-25-TPS TCC-25 cuts the tubes, separates them into two lanes and feeds into two independent tube end spinners - For tube diameters 5 - 10 mm - For copper tubes
Новинки
